Updated November 2026
Choosing an rv shore power plug 50 amp connection can feel confusing, because the plug, inlet and cord each look similar but do different jobs. This list covers five well-known 50-amp options, compared by what they are built for, how they connect, and how easy they are to install. The selection method is research-based: we looked at manufacturer specifications, brand reputation and common owner feedback patterns. We did not test these products ourselves. A related read: Top 6 Extension Cords for RV Shore Power Options for Campers (2026).
Our top picks at a glance
- 1
TOP CHOICEBest overallCamco Power Grip 50 Amp RV Power Cord Replacement PlugView on Amazon - 2
TOP CHOICEBest for a replacement inletKohree 50 Amp RV Plug Twist Lock InletView on Amazon - 3
TOP CHOICEBest for a no-twist setupSmartPlug B50ASSY 50 Amp Shore Power Inlet and Connector Combo KitView on Amazon - 4
Best for cable strain reliefCORDMITPRO 50A RV Replacement Female ConnectorView on Amazon - 5
Best budget inlet box50 AMP 125/250V RV Inlet 3 Prong Male Plug Shore Power Inlet NEMA SS2-50PView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| Camco Power Grip 50 Amp Replacement Plug | Overall replacement plug | Ergonomic handle |
| Kohree 50 Amp Twist Lock Inlet | Replacing a worn inlet | Steel pins and screws |
| SmartPlug B50ASSY Inlet and Connector Kit | No-twist shore power setup | Stainless steel kit |
| CORDMITPRO 50A Replacement Female Connector | Reducing cable strain | Angled end design |
| 50 AMP RV Inlet 3 Prong Male Plug Box | Budget inlet replacement | Black inlet with twist-lock |
Camco Power Grip 50 Amp RV Power Cord Replacement Plug
Camco Power Grip 50 Amp RV Power Cord Replacement Plug – Easy to Install | Attaches to Existing RV Extension Cord – 50 Amp RV Plug (NEMA 14-50P) w/ Ergonomic Handle – Rated 125-250V/12,500W (55255)
Best for: Replacing a damaged plug on an existing extension cord
This suits campers who already have a good cord and only need to swap the end. The listing describes it as attaching to an existing RV extension cord with an ergonomic handle.
Pros
- Designed to attach to an existing cord
- Ergonomic handle for easier gripping
Cons
- Requires wiring skill to install
Kohree 50 Amp RV Plug Twist Lock Inlet
Kohree 50 Amp RV Plug Twist Lock Inlet | NEMA SS2-50P, 125V/250V, with 3 Steel Pins and Screws, Shore Power Inlet Plug, For Marine Boat Trailer Camper, ETL Listed
Best for: Replacing a worn or loose inlet on a trailer or RV
This fits owners whose inlet box has failed and who want a direct swap. The listing states it comes with three steel pins and screws and carries ETL listing for 125V/250V use.
Pros
- Steel pins and mounting screws included
- Lists ETL certification
Cons
- Installation requires basic electrical work
SmartPlug B50ASSY 50 Amp Shore Power Inlet and Connector Combo Kit
SmartPlug B50ASSY 50 Amp Shore Power Inlet and Connector Combo Kit | Stainless Steel | Boat and RV Power Inlet Plug 125V/250V | No-Twist Shore Power Kit
Best for: A matched inlet and connector in one kit
This suits owners who want the inlet and connector sold together so the fit is predictable. The listing emphasizes stainless steel construction and a no-twist connection.
Pros
- Inlet and connector sold as a matched set
- Stainless steel construction
Cons
- Costs more than a single-piece replacement
CORDMITPRO 50A RV Replacement Female Connector
CORDMITPRO 50A RV Replacement Female Connector, Yellow SS2-50R Angled End | 125/250V 50 Amp, ETL Listed, Ergonomic Angled Design, Reduce Cable Strain, Twist-Lock Ring
Best for: Reducing strain on the cable at the plug end
This is a fit for campers who often see the cord pulled tight at the pedestal. The angled end is intended to reduce cable strain while keeping the twist-lock ring.
Pros
- Angled end reduces cable strain
- Twist-lock ring listed
Cons
- Female connector only, so the cord still needs a matching end
50 AMP 125/250V RV Inlet 3 Prong Male Plug Shore Power Inlet NEMA SS2-50P
50 AMP 125/250V RV Inlet 3 Prong Male Plug Shore Power Inlet NEMA SS2-50P | 50 Amp Replacement RV Power Inlet Plug Box,50 Amp Male End Connector with Twist-Lock Connection,Black
Best for: A lower-cost inlet box replacement
This suits owners who want a simple inlet swap and are comfortable with a standard male end. The listing describes a black twist-lock inlet with NEMA SS2-50P rating. A related read: 5 Best 30 Amp RV Shore Power Kits for Campers (2026).
Pros
- Simple, familiar NEMA SS2-50P design
- Black finish for a clean look
Cons
- Less detail in the listing about materials
Buying Guide
Confirm the NEMA rating
A 50-amp shore power connection is usually rated NEMA SS2-50, and the plug and inlet must match. Check the label on your existing hardware before you buy.
Decide between plug, inlet and cord
A plug goes on the end of a cord, an inlet is mounted on the rig, and a cord carries the power. Buy the part that matches the point of failure.
Look at the twist-lock and pin design
Twist-lock connections hold better under vibration than push-fit designs. Steel pins are common on quality inlets and are worth comparing.
Plan for cable strain
A tight, pulled cord at the pedestal can wear the connection over time. Angled or strain-relief ends can help with this.
Good picks for this: Kohree 50 Amp RV Plug Twist Lock Inlet and CORDMITPRO 50A RV Replacement Female Connector
FAQ
What does NEMA 14-50P mean?
NEMA 14-50P is the standard designation for a 50-amp, 125/250-volt, four-prong plug commonly used for RV and EV charging connections. The “P” stands for plug, meaning it is the male end that goes into an outlet or inlet. Always confirm the designation on the product before you buy, since mismatched ratings can cause poor connections.
Is a plug, an inlet and a cord the same thing?
No. A plug is the male end that connects to a power source, an inlet is the fixed socket mounted on the RV that accepts the plug, and a cord is the flexible cable that runs between them. Replacing one part does not always replace the others, so check what you actually need before ordering.
Can I install a 50 amp plug myself?
Many RV owners handle basic plug or inlet replacement themselves, provided they are comfortable working with wiring and can follow the manufacturer’s instructions closely. Work on any live circuit should be avoided, and power should be fully disconnected first. If you are unsure, having a qualified electrician or RV technician do the job is a safer choice.
Why does the twist-lock design matter?
A twist-lock connection holds the plug firmly in place and reduces the chance of it working loose from vibration or accidental tugs. This helps maintain a stable connection and lowers the risk of heat buildup at the contact points. For a 50-amp load, a secure fit is especially important.
How do I reduce strain on the cable?
Angled or ergonomic designs can help keep the cord from pulling sharply at the connection point, which is one of the most common causes of damage over time. Leaving a little slack in the cable and avoiding tight bends near the plug also helps. Routing the cord so it is not pinched under doors or wheels will extend its life.
Should I buy a combo kit or individual parts?
A combo kit can be convenient if you are replacing both the inlet and the plug at once, since the parts are designed to work together. Individual parts make sense if only one component is worn or damaged and the other is still in good condition. Matching the rating and style of any existing parts is important either way.
Conclusion
If you want a straightforward replacement for an existing extension cord setup, the Camco option is a practical starting point. For a permanent inlet on a camper or trailer, the Kohree, SmartPlug and the 50 Amp RV Inlet listings cover different needs depending on whether you want a combo kit or individual parts.
Buyers who need an angled end to reduce cable strain should look at the CORDMITPRO connector, while those who want a simple, secure twist-lock plug with clear NEMA labeling will find the other options a good fit. Confirm the rating and connection style against your existing equipment before you buy.

