Updated November 2026
The furrion 12v fridge fuse size you need is printed on the fuse itself and on the fridge’s wiring label, and it should match the rating the manufacturer specifies for your model. This guide shows you how to confirm the correct amperage, check the fuse for a blow, and replace it with the right part. Most Furrion 12V fridges are protected by a blade-style automotive fuse, so the job takes only a few minutes once you know where to look.
Confirm the Fuse Rating Before You Buy Anything
Start with the manual or the rating label on the fridge. Manufacturers specify a fuse amperage for each model, and that number is the one to use. Do not guess from the fuse that happens to be in place, because a previous owner may have installed the wrong size. If you have lost the manual, the model number on the rating plate will let you look up the correct specification online.
Shopping for one? See our guide: Furrion 12V Fridge Problems: Common Issues and Fixes.
Once you know the rating, check the fuse body for its amperage. Blade fuses are color coded, so you can also confirm the value by color if the printed number is hard to read.
Check Whether the Fuse Has Blown
A blown blade fuse usually shows a broken or darkened element inside the clear plastic housing. If you cannot tell by sight, test it with a multimeter set to continuity or low ohms. A good fuse reads close to zero ohms, while a blown one reads open.
- Disconnect power to the fridge at the battery or the control panel.
- Locate the fuse holder on the fridge’s DC power lead or in the vehicle’s fuse box, depending on your setup.
- Pull the fuse with a fuse puller or small pliers.
- Inspect the element. If it is broken, replace it. If it looks intact, test it with the meter.
Replace the Fuse With the Correct Size
When you install a replacement, match three things: the amperage rating, the blade type (mini, standard or maxi), and the voltage rating, which should be at least 12V DC. Pushing in a fuse of higher amperage to stop nuisance blowing is a fire risk, because the wiring can overheat before the fuse opens. If a fuse of the correct size keeps blowing, the cause is usually a fault in the fridge, the wiring or the battery connection, not the fuse.
Tools and parts you will need
- A replacement blade fuse of the rating printed in your manual
- A fuse puller or needle-nose pliers
- A multimeter for continuity testing
- A flashlight to read small markings
Common Mistakes to Avoid
- Installing a higher-rated fuse to stop it from blowing, which removes protection from the wiring.
- Mixing blade sizes. A mini fuse will not seat properly in a standard holder.
- Skipping the power disconnect before pulling the fuse.
- Assuming the fuse is the problem without checking the fridge’s power draw. Running a fridge on an undersized or weak battery can trigger repeated blows.
- Using a non-automotive fuse with a different voltage or time-delay rating.
Recommended Gear
A basic blade fuse assortment kit lets you carry the correct sizes on a trip, so a blown fuse at a remote campsite is a quick swap rather than a problem. View on Amazon
A digital multimeter is the simplest way to confirm whether a fuse is still good. Look for one with a continuity setting. View on Amazon
A fuse puller keeps your fingers clear of hot or tight fuse holders. View on Amazon
FAQ
What fuse size does a Furrion 12V fridge use?
The correct amperage is specified by Furrion for your specific model and is printed on the rating label. Always use the rating from the manual or label rather than a general value.
Can I use a higher-amp fuse if the right one keeps blowing?
No. A higher-rated fuse can allow wiring to overheat before it opens, which is a fire hazard. Find and fix the underlying fault instead.
How do I know if the fridge fuse is blown?
Look for a broken or darkened element inside the clear housing, or test it with a multimeter on continuity. If you are unsure about the wiring, consult a qualified RV or automotive electrician.
Conclusion
The correct furrion 12v fridge fuse size is the rating specified for your model, so confirm it from the manual or label before buying a replacement. Check the old fuse for a blow, replace it with the matching type and amperage, and avoid upsizing it. If the new fuse blows again, the cause is elsewhere in the system and needs to be found before the fridge runs again.
Related reading
- Furrion 12v Fridge Fuse Conversion Kit: Steps, Parts and Wiring Tips
- Furrion 12V Fridge Fuse: How to Find, Check and Replace It
- Furrion 12V Fridge Fuse Location: Where to Find It and How to Check It
- What Size Battery to Run 12V Fridge: Amp-Hour Math for Camping
- Solar Panel for 12V Fridge: How to Size One for Camping

