Updated November 2026
Shore power is the 120-volt AC electricity your RV draws from an external source, usually a campground pedestal or a home outlet, instead of its own generator or batteries. When you understand what is shore power RV owners rely on, you can run your air conditioner, microwave and battery charger without draining your house batteries. This guide explains how the connection works, what to check before you plug in, and what to avoid.
How Shore Power Reaches Your RV
Shore power travels from the campground’s electrical pedestal through a cord to a receptacle on your RV, called the inlet. Most RVs use one of two standard connections: a 30-amp plug (three prongs, 120 volts) or a 50-amp plug (four prongs, split 120/240 volts). Your RV’s inlet and the pedestal must match, or you will need an adapter, which should be used with care.
Shopping for one? See our guide: 5 Best 30 Amp RV Shore Power Cords for Campers (2026).
Once connected, the power flows into your RV’s distribution panel, which feeds the lights, outlets and appliances. The converter, often built into the RV, changes AC to DC to keep your house batteries charged and to run 12-volt devices.
What Amperage Means for Your Campsite
Amperage determines how much power is available at once. A 30-amp connection supplies roughly 3,600 watts, while a 50-amp connection can supply about 12,000 watts across both legs. Your RV’s air conditioner, electric water heater and microwave can exceed a 30-amp limit if run together, which trips the breaker.
To avoid overloads, check your RV’s rated amperage and add up the running wattage of appliances before you turn them all on. Staggering heavy loads is often enough to keep things running.
Connecting Shore Power Step by Step
- Turn off all major appliances and confirm the RV’s main breaker is off.
- Inspect the pedestal outlet and your cord for cracks, scorch marks or loose prongs.
- Plug the cord into the pedestal first, then into the RV inlet.
- Turn on the main breaker and check the RV’s surge protector or power meter for voltage and polarity faults.
- Turn on appliances one at a time, watching the power meter as the load increases.
A reliable surge protector or power management system, such as the Southwire Surge Guard for RV power protection, helps guard against low voltage, high voltage and reversed polarity at the campsite.
Shore Power Versus Generator and Batteries
Shore power is usually the quietest and most stable option, with no fuel to haul and no batteries to recharge. Generators and battery banks are better when no hookup is available. If you’re weighing these options, Solar Power for RV Air Conditioning: How Many Panels You Really Need explains how much solar capacity it takes to replace a campground connection for cooling.
Equipment That Makes Shore Power Work
The cord, inlet and any converter all matter. If you’re replacing a worn cord, RV Shore Power Cord: How to Choose, Use and Care for One (2026) covers gauge and length. For a converter upgrade, 5 Best RV Shore Power Converters for Campers (2026) compares common options.
Common Mistakes to Avoid
- Plugging into a pedestal without first checking for damaged outlets or scorched contacts.
- Using an adapter that bypasses the RV’s amperage protection.
- Running the air conditioner, water heater and microwave at the same time on a 30-amp line.
- Ignoring a surge protector warning and plugging in anyway.
- Leaving a cord coiled under load, which can overheat it.
Recommended Gear
- A surge protector helps detect low or high voltage and reversed polarity before they damage appliances. View on Amazon
- A quality RV power cord with the correct plug for your inlet keeps the connection secure and rated for the load. View on Amazon
FAQ
Is shore power the same as a generator?
No. Shore power comes from an external utility connection at the campground or home, while a generator makes its own power from fuel. Shore power is typically quieter and runs without refueling.
Can I use shore power with a 30-amp RV on a 50-amp pedestal?
Only with a proper adapter, and you should still respect the 30-amp limit. The RV’s breakers and wiring set the true capacity, not the pedestal.
Does shore power charge the RV batteries?
Yes, the RV’s converter uses shore power to charge the house batteries while also powering 120-volt devices. Electrical work beyond plugging in should be handled by a qualified RV technician or electrician.
Conclusion
Shore power gives your RV a steady supply of 120-volt electricity from a campground or home connection. Match your cord and inlet, know your amperage, and use a surge protector to keep your appliances safe. With those basics in place, you can enjoy full power at the campsite without worrying about overloads.

