Updated November 2026

A camping lantern craft printable is a template you print, cut and fold into a paper lantern that glows when a small light is placed inside. This guide walks you through choosing a printable, preparing the materials and assembling a lantern that holds up on a campout. The whole project takes about 30 to 45 minutes with a child, and the finished lantern works best with a battery tea light or LED puck rather than a real flame.

Choose the Right Printable and Paper

Look for a printable sized for standard US letter paper (8.5 by 11 inches) if you own a home printer. Templates usually come as a single page with dashed fold lines and cut lines in solid black. Cardstock in the 65 to 110 lb range folds cleanly and keeps its shape, while regular printer paper tends to sag once the light is inside.

Shopping for one? See our guide: Top 7 Solar Powered Camping Lanterns for Power Outages and Trips.

If you plan to hang the lantern from a tent loop or tree branch, choose a template that includes a top handle or add a short strip of ribbon. Paper lanterns are fragile, so keep them away from wet grass and sparks.

Assemble the Lantern Step by Step

  1. Print the template at 100 percent scale. Check that the scale setting is not set to “fit to page,” or the box dimensions will be off.
  2. Cut along all solid lines. Use a craft knife on a cutting mat for straight edges, or scissors for curves.
  3. Score every dashed fold line by running the back of a butter knife along a ruler. This prevents cracking when you bend the paper.
  4. Fold the panels inward so the printed side faces out. Crease each fold sharply.
  5. Glue or tape the side tabs to the matching panels. Hold each joint for 30 seconds so the glue sets.
  6. Attach the top and bottom flaps, then insert a battery tea light or LED puck through the base opening.

Make It Last on the Trail

A lantern that survives one evening at camp may not survive a week of packing. Laminate the finished lantern with clear contact paper, or spray it lightly with a clear acrylic sealer and let it dry fully. Both options add stiffness and resist moisture from dew.

Pack the flat, unassembled template in a folder so the folds stay sharp. Assemble on site rather than carrying the built lantern in a backpack, where it can crush.

Camping Lantern Craft Printable Safety Basics

Never place a real flame inside a paper lantern. Paper ignites easily, and a lantern that tips over can start a fire on dry ground or near a tent. Use only battery-powered tea lights or LED pucks, and keep the lantern at least a few feet from tent walls and sleeping bags.

Tips and Common Mistakes

  • Skipping the scoring step, which leads to cracked folds and uneven corners.
  • Printing at the wrong scale, so the lantern does not fit the light source.
  • Using thin copy paper, which collapses when the light warms the interior.
  • Gluing the base shut before inserting the light, leaving no way to change the battery.
  • Hanging the lantern near a campfire or stove.
  • Battery tea lights: A set of flameless tea lights gives a warm glow without heat or fire risk. View on Amazon
  • Cardstock: Heavier paper holds its shape and resists sagging. View on Amazon
  • Craft knife and cutting mat: Clean, straight cuts make the folds line up. View on Amazon

FAQ

Can I use a real candle inside a paper camping lantern?

No. Paper lanterns can catch fire quickly, and a real flame creates heat that can scorch the walls. Battery tea lights provide the same glow with much lower risk.

What paper works best for a camping lantern craft printable?

Cardstock between about 65 and 110 lb holds its shape well. Regular printer paper is usually too thin and tends to sag once the light is inside.

How long does the lantern last on a camping trip?

A laminated or sealed lantern can last several nights if kept dry and away from heavy handling. Replace the battery light as needed, and keep spare batteries in your pack.

Conclusion

A camping lantern craft printable is an easy project that turns a single sheet of paper into a working light for your campsite. Print at the right scale, score the folds, and use only battery-powered lights inside. With a little prep, the lantern can be a fun and safe addition to your next trip.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our off-grid power for camping, RV & vanlife guides, checking product details against manufacturer specifications and owner feedback.