Updated November 2026
A 12V fridge typically uses somewhere between about 20 and 60 amp-hours (Ah) per day, depending on the cooling technology, the ambient temperature, and how often the lid is opened. To find the exact number for your fridge, you need its rated current draw and its duty cycle, which is the share of each hour the compressor actually runs. This guide walks through the calculation so you can plan your battery bank with confidence.
Step 1: Find the Rated Current Draw
Start with the label on the fridge or the spec sheet in the manual. Manufacturers usually list running current in amps at a specific voltage, often 12V, and sometimes a separate figure for startup surge. A compressor fridge commonly runs at roughly 3 to 6 amps while the compressor is on. Thermoelectric (Peltier-style) coolers often draw 4 to 8 amps and run continuously, so their daily total is usually higher relative to their cooling performance.
Shopping for one? See our guide: 9 Best 12V Fridges for Camper Buyers Compared (2026).
If the label only gives watts, divide by 12 to get amps. A fridge rated at 48 watts draws about 4 amps at 12V. For a deeper look, Campfire Cooking Grates Swing Arm: How to Choose, Set Up and Use One covers this in detail.
Step 2: Estimate the Duty Cycle
A compressor fridge does not run nonstop. Its duty cycle, the percentage of time the compressor is running, depends on conditions:
- Cool weather, fridge in shade: often 25 to 35 percent of the time.
- Hot weather or direct sun: often 50 to 70 percent, sometimes higher.
- Frequent door openings: pushes the duty cycle up further.
Owners often report that a compressor fridge in mild conditions runs far less than a thermoelectric unit, which tends to stay on whenever it is powered.
Step 3: Calculate Daily Amp-Hours
Use this formula:
Daily Ah = Running amps × Hours per day × Duty cycle
For example, a fridge drawing 4.5 amps with a 40 percent duty cycle over 24 hours uses about 4.5 × 24 × 0.40 = 43 Ah per day. The same fridge in cooler weather at a 25 percent duty cycle uses about 27 Ah per day.
| Scenario | Running Amps | Duty Cycle | Approx. Daily Ah |
|---|---|---|---|
| Compressor fridge, mild weather | 4 | 25% | 24 Ah |
| Compressor fridge, hot weather | 4.5 | 50% | 54 Ah |
| Thermoelectric cooler, any weather | 5 | near 100% | about 100 Ah |
Step 4: Size Your Battery Bank
Once you have a daily Ah figure, add a margin. Lead-acid batteries should not be discharged below about 50 percent, so a common rule is to double the daily figure to get the usable capacity you need. Lithium batteries tolerate deeper discharge, often 80 percent or more, so the multiplier can be smaller. Consult the battery maker’s specifications, and if you are wiring a system for a vehicle, a qualified installer can confirm the setup.
For more on managing the draw in practice, see How Much Power Does 12V Fridge Use? Amps, Watt-Hours and Daily Draw and Will a 12V Fridge Drain My Battery? How to Avoid It.
Common Mistakes
- Using the startup surge figure instead of the running current for daily totals.
- Assuming the fridge runs 24 hours at full draw, which overstates usage in cool weather.
- Ignoring ambient heat. A fridge in a hot vehicle can use nearly double the energy of one in the shade.
- Forgetting that a thermoelectric cooler usually cannot be left on as freely as a compressor model without draining the battery.
- Skipping a fan or ventilation. Poor airflow makes the compressor work harder, as covered in 12V Fridge Power Consumption: How Many Amps It Really Draws.
Recommended Gear
A clamp meter helps you measure real running current instead of relying only on the label. Pair it with a battery monitor that tracks amp-hours in and out, so you can see your actual daily draw over several nights.
FAQ
Is a 12V fridge more efficient than a thermoelectric cooler?
In most cases, yes. A compressor fridge cycles on and off, so its average draw is usually well below a thermoelectric unit that runs almost continuously. Efficiency also depends on insulation and ambient temperature.
Can I estimate Ah without a meter?
Yes, using the rated amps, a reasonable hour count, and a duty-cycle estimate gives a workable figure. A meter or battery monitor will give you a more accurate number over time.
How many Ah should a battery have for a 12V fridge?
It depends on your daily draw and how many days you need to run without recharging. Double the daily Ah for lead-acid, or use a smaller margin for lithium, and always check the battery’s usable capacity.
Conclusion
A 12V fridge’s amp-hour use comes down to running current, hours, and duty cycle. Run the simple formula with realistic weather numbers, then add a battery margin that matches your chemistry. Checking your actual draw for a few nights will tell you whether your estimate holds up.

